|本期目录/Table of Contents|

[1]游革新,姚文迪,尹诗衡.LLDPE/SBS共混压缩回弹性能研究[J].武汉工程大学学报,2011,(01):107-110.[doi:10.3969/j.issn.16742869.2011.01.027]
　YOU Ge xin,YAO Wen di,YIN Si heng.Study on compressionrecovery performance of LLDPE/SBS blends[J].Journal of Wuhan Institute of Technology,2011,(01):107-110.[doi:10.3969/j.issn.16742869.2011.01.027]
点击复制

LLDPE/SBS共混压缩回弹性能研究(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2011年01期
页码:
107-110
栏目:
化学与化学工程
出版日期:
2011-01-30

文章信息/Info

Title:
Study on compressionrecovery performance of LLDPE/SBS blends
文章编号:
16742869(2011)01010704
作者:
游革新1; 姚文迪1; 尹诗衡2
1.华南理工大学机械与汽车工程学院,广东 广州 510640;
2.华南理工大学分析测试中心,广东,广州 510640
Author(s):
YOU Gexin1;  YAO Wendi1;  YIN Siheng2
1.Colloege of MecoLand Automotive Engineering, South China University of Technology, Guangzhou 510640, China;
2. Andytical and Festing Center, South China Unicersity of Fechnology, Guangzhou 510640, China
关键词:
LLDPE/SBS; 共混比; 定应变压缩; 回弹性能
Keywords:
LLDPE/SBS;  blending ratio;  constant strain compression;  resilience
分类号:
TQ325.1
DOI:
10.3969/j.issn.16742869.2011.01.027
文献标志码:
A
摘要:
采用熔融共混的方法制备不同组成LLDPE/SBS共混体系,并对共混体系应力应变之间关系进行了研究,也对共混体系组成对最大应力、邵氏硬度和回弹性等力学性能的影响进行了研究.研究结果表明,随着LLDPE含量的减少,共混体系的邵氏硬度和最大应力均减小;拮抗作用导致共混体系的最大应力小于两组分对应力贡献之和;共混体系中SBS的含量为30份时,共混体系一次压缩回弹性、二次压缩回弹性和三次压缩回弹性差异不大;定应变循环压缩应力-应变曲线可以密封垫的压缩程度提供指导;应力与组成的关系式可以为确定密封垫组成提供依据.
Abstract:
LLDPE/SBS blends in different blending ratios were prepared by melt blending and the relationship between stress and strain was studied.The blends compositions effects on the maximum stress, shore hardness and elasticity were also studied. The results showed that the value of hardness and the maximum stress were reduced with the decreased content of LLDPE.The antagonism effect made the maximum stress of the blends less than the simple sum of each component’s contribution.First compression resilient, secondary compression resilient and three compression resilient had little difference when the content of SBS in blends was 30 phr.Constant strain cyclic stressstrain curves could provide guidance for the compression degree of gaskets.The relationship between stress and composition could provide the basis for determining the gaskets composition.

参考文献/References:

［1］冯绍胜编著.塑料在食品包装中的应用［M］.北京:中国食品出版社,1988:1721.
［2］刘生鹏,张苗,胡昊泽,等.聚乙烯改性研究进展［J］.武汉工程大学学报,2010,32(3):3136.
［3］G.霍尔登.热塑性弹性体［M］.北京:化学工业出版社,2000:18.
［4］吴培熙,张留城编著.聚合物共混改性［M］.北京:中国轻工业出版社,2009:6468.
［5］肖红,余治芳,周璐瑛,等.救生衣用泡沫塑料压缩回弹性能测试方法研究［J］.中国个体防护装备,2003（1）:1518.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期：20100709作者简介：游革新(1959),男,湖北孝感人,高级工程师,博士.研究方向：材料加工及功能化.
更新日期/Last Update: