|本期目录/Table of Contents|

[1]陈彪,廖昱*.非晶合金摩擦焊装置设计[J].武汉工程大学学报,2013,(10):52-56.[doi:103969/jissn16742869201310011]
　CHEN Biao,LIAO Yu.Design of friction welding set\|up for bulk metallic glasses[J].Journal of Wuhan Institute of Technology,2013,(10):52-56.[doi:103969/jissn16742869201310011]
点击复制

非晶合金摩擦焊装置设计(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2013年10期
页码:
52-56
栏目:
机电与信息工程
出版日期:
2013-11-10

文章信息/Info

Title:
Design of friction welding set\|up for bulk metallic glasses
文章编号:
16742869(2013)10005205
作者:
陈彪1; 廖昱2*
1.湖北第二师范学院物理与机电工程学院，湖北 武汉 430205；2.武汉理工大学自动化学院，湖北 武汉 430070
Author(s):
CHEN Biao1;  LIAO Yu2
1.School of Physical and Mechanical & Electrical Engineering,Hubei University of Education,Wuhan 430205,China;2.School of Automation, Wuhan University of Technology, Wuhan 430070, China
关键词:
摩擦焊; 参数控制; 非晶合金; 连接
Keywords:
friction welding; parameter controe; bulk metallic glass; bonding
分类号:
TH122
DOI:
103969/jissn16742869201310011
文献标志码:
A
摘要:
为了增大非晶合金尺寸，设计了一种新型摩擦焊装置，用来连接毫米尺度的非晶合金棒料.该装置主要由主轴旋转单元，直线驱动单元以及参数控制单元三部分组成，分别实现工件的旋转、直线运动、摩擦焊接参数控制及采集.采用LABVIEW软件搭建了操作界面，实现焊接过程中主要参数的输入及监控采集.以Zr55Cu30Al10Ni5非晶棒料为焊接对象，在不同焊接参数下进行了摩擦焊试验.结果表明，较高的转速能更快的让摩擦界面较短时间内完全进入过冷液相区，成功实现工件连接.新型摩擦焊装置能够实现非晶合金棒料的连接，达到设计要求.
Abstract:
To increase the dimension of bulk metallic glass, a new friction welding set\|up was constructed for joining the bulk metallic glass rods with millimeter dimension. This friction welding set\|up includes spindle rotation unit, linear driving unit and parameters control unit. They were used to carry out the rotary motion, linear motion, parameters control and collection during friction welding, respectively. The LABVIEW software was used to design the operation interface for inputting and monitoring & collecting experimental data. With the different welding parameters, Zr55Cu30Al10Ni5 bulk metallic glass rods were welded using the new friction welding set\|up. The results indicate that the high rotate speed makes the temperature in whole interfaces reach supercooled liquid region within a very short time, also it facilitates workpieces to be weld successfully. The new friction welding set\|up can be used to join the bulk metallic glass rods and the design meets the requirement.

参考文献/References:

\[1\]伍复发,张哲峰.非晶合金的变形与断裂行为\[J\].中国基础科学，2008（4）：9\|10.WU Fu\|fa,ZHANG Zhe\|feng.Deformation and fracture behaviors of amorphous alloys\[J\]. China Basic Science,2008（4）：9\|10. (in Chinese)\[2\]Suryanarayana C,Inoue A.Bulk metallic glasses \[M\]. NewYork：CRC press,2011.\[3\]Kawamura Y,Shoji T, Ohno Y.Welding technologies of bulk metallic glasses\[J\]. Journal of Non\|Crystalline Solids, 2003（317）：152\|157.\[4\]Shin H S,Jeong Y J, Choi H Y, et al. Joining of Zr\|based bulk metallic glasses using the friction welding method \[J\]. Journal of alloys and compounds,2007（434\|435）：102\|105.\[5\]Chen H Y, Cao J, Song X G. Contributions of atomic diffusion and plastic deformation to the plasma surface activation assisted diffusion bonding of zirconium\|based bulk metallic glass\[J\]. Applied Physics Letters,2012（10）：211602\|1\|211602\|4. \[6\]Chen B, Shi T L, Li M, et al.Laser welding of Zr41Ti14Cu12Ni10Be23 bulk metallic glass: experiment and temperature field simulation\[J\]. Advanced Engineering Materials, 2013（5）：407\|413.\[7\]Wang G,Huang Y G,Makhanlall D,et al.Friction joining of Ti40Zr25Ni3Cu12Be20 bulk metallic glass\[J\]. Journal of Materials Processing Technology, 2012（212）：1850\|1855.\[8\]覃作祥,王小京,张海峰,等.Zr55Al10Ni5Cu30块体金属玻璃的摩擦焊焊接\[J\].金属学报, 2009（5）：620\|624.QIN Zuo\|xiang,WANG Xiao\|jing,ZHANG Hai\|feng,et al.Friction welding of Zr55Al10Ni5Cu30 bulk metallic glasses\[J\]. Acta Metallurgica Sinica,2009（5）：620\|624.（in Chinese）

相似文献/References:

备注/Memo

备注/Memo:
收稿日期：20130922基金项目：湖北省教育厅科学技术研究计划资助项目（Q20133004）作者简介：陈彪(1981\|)，男，湖北孝感人，讲师，博士研究生.研究方向：机械设计与制造. * 通信联系人
更新日期/Last Update: 2013-11-11