|本期目录/Table of Contents|

[1]吴珊,毛旭耀*,吴德发.一种水压比例同步控制系统的研究[J].武汉工程大学学报,2010,(11):94-97.[doi:10.3969/j.issn.16742869.2010.11.025]
 WU Shan,MAO Xu yao,WU De fa.Research on a water hydraulic proportional synchronous control system[J].Journal of Wuhan Institute of Technology,2010,(11):94-97.[doi:10.3969/j.issn.16742869.2010.11.025]
点击复制


一种水压比例同步控制系统的研究
(/HTML)
分享到:

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2010年11期
页码:
94-97
栏目:
机电与信息工程
出版日期:
2010-11-30

文章信息/Info

Title:
Research on a water hydraulic proportional
synchronous control system
文章编号:
16742869(2010)11009404
作者:
吴珊1毛旭耀2*吴德发2
1.中南民族大学工商学院基础课部,湖北 武汉 430223;
2.华中科技大学机械工程学院,湖北 武汉 430074
Author(s):
WU Shan1 MAO Xuyao2 WU Defa2
1.Department of General Foundlation Roquistes, Engineering and Commerce college,
Southcentral University for Nationalities, Wuhan Hubei 430223,China;
2.School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074,China
关键词:
水压传动同步控制主从控制比例阀PID
Keywords:
water hydraulics synchronous control masterslave control proportional valve PID
分类号:
TH137
DOI:
10.3969/j.issn.16742869.2010.11.025
文献标志码:
A
摘要:
研究了一种带位置反馈的水压比例双缸同步控制系统.选择主从控制策略,其中主动缸采用分别布置于进出口的两个单向节流阀控制,从动缸采用两个水压比例流量阀控制,并建立了系统的数学模型.与此同时,建立了试验测试系统并将试验结果与仿真结果进行了对比.试验结果表明,采用PID控制方法同步控制精度达到2.5%,同时理论分析和试验结果具有很好的一致性.
Abstract:
In this paper, a dualcylinder water hydraulic synchronous system with position feedback was studied. A masterslave control strategy was selected in the system, in which the master cylinder was controlled by two manually variable throttle check valves respectively at the inlet and outlet of the cylinder and the slave cylinder was controlled by two proportional flow control valves. The mathematical mode of the system was built up and simulation carried out. At the same time, a test bench using tap water as the media was established. Experimental results were compared with the simulation results. An experimental synchronous precision about 2.5% was obtained by using an adaptive PID control method.

参考文献/References:

[1]郭志恒,李利,刘银水,等.水压驱动水下舞台的设计与试验研究[J].液压与气动,2010(4):46.
[2]Konskinen K T, Vilenius M J, Virvalo T,et al. Water as a Pressure Medium in Position Servo Systems[C]//The Proceedings of the Fourth Scandinavian International Conference on Fluid Power.FINLAND:1995:859871.
[3]Wu Huapeng, Handroos Heikki, Pessi Pekka et al. Development and control towards a parallel water hydraulic weld/cut robot for machining processes in ITER vacuum vessel[J]. Fusion Engineering and Design,2005(7579,SUPPL):625631.
[4]Kekalainen Teemu, Mattila Jouni, Virvalo Tapio. Development and design optimization of water hydraulic manipulator for ITER[J].Fusion Engineering and Design,2009,84(26):10101014.
[5]Nieminen Peetu, Esque Salvador, Muhammad Ali1 et al. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER[J]. Fusion Engineering and Design,2009,84(711):14201424.
[6]Sanada K. A Method of Designing a Robust Force Controller of a WaterHydraulic Servo System[J].The Proceedings of the Institution of Mechanical Engineerings, 2002:135141.
[7]Satoru Hayashi, Atsushi Shirai, Nannan Guo,et al.Static and Dynamic Characteristics of A PressureCompensated Flow Valve[C]//Proceedings of the Fifth International Conference on Fluid Power Transmission. SWDN:2001:156160.
[8]Lauri Laitinen, Klaus Heiskanen, Jyrki Kajaste,et al. Friction Phenomena in a Water Hydraulic Cylinder at Low Pressure Levels[C]//the Eighth Scandinavian International Conference on Fluid Power, Finland, 2003:421431.
[9]程文芳.水压双缸位置同步控制系统的研究[D].武汉:华中科技大学,2008.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:20101101基金项目:国家自然科学基金资助项目(NO.50975101)作者简介:吴珊(1979),女,湖北武汉人,讲师,硕士.研究方向:工程数学及应用
更新日期/Last Update: