|本期目录/Table of Contents|

[1]朱岩,陈璐璐,石瑞.MCDEA嵌段改性TPU的制备及其拉伸性能[J].武汉工程大学学报,2011,(04):12-16.[doi:10.3969/j.issn.16742869.2011.04.003]
 ZHU Yan,CHEN Lu lu,SHI Rui.Preparation of block modified TPU by adding MCDEAand its tensile properties[J].Journal of Wuhan Institute of Technology,2011,(04):12-16.[doi:10.3969/j.issn.16742869.2011.04.003]
点击复制

MCDEA嵌段改性TPU的制备及其拉伸性能(/HTML)
分享到:

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2011年04期
页码:
12-16
栏目:
化学与化学工程
出版日期:
2011-04-30

文章信息/Info

Title:
Preparation of block modified TPU by adding MCDEA
and its tensile properties
文章编号:
16742869(2011)04001205
作者:
朱岩陈璐璐石瑞
武汉理工大学化学工程学院,湖北 武汉 430070
Author(s):
ZHU Yan CHEN Lulu SHI Rui
Department of Chemical Engineering, Wuhan University of Technology, Wuhan 430070, China
关键词:
热塑性聚氨酯(TPU)MCDEA拉伸性能
Keywords:
thermoplastic polyurethane MCDEA tensile properties
分类号:
TQ433.4
DOI:
10.3969/j.issn.16742869.2011.04.003
文献标志码:
A
摘要:
热塑性聚氨酯(TPU)颗粒通过除杂除油处理后,用六亚甲基二异氰酸酯(HDI)对其进行活化处理,使其两端形成自由的异氰酸酯基团(—NCO).再加入MCDEA(4,4’亚甲基双(3氯2,6二乙基苯胺)),使MCDEA中的—NH2和TPU两端自由—NCO进行反应,生成脲基(—NHCONH),从而使MCDEA进入TPU体系.通过加入不同量的MCDEA,以及MOCA(3,3’二氯4,4’二氨基二苯甲烷)和DMTDA(3,5二甲硫基2,4甲苯二胺及3,5二甲硫基2,6甲苯二胺两种异构体的混合物)分别对TPU进行嵌段改性,并对改性后的TPU胶膜进行拉伸性能测试.结果表明,在TPU和MCDEA比例为1/7时拉伸性能最好,同时选择拉伸性能较好且几乎无毒的MCDEA较为适宜.
Abstract:
TPU was activated by hexamethylene diisocyanate (HDI) after the treatment of oil removing and cleaning the surface, and form free isocyanate groups(—NCO) on both sides. Then the ureido(—NHCONH) was formed by the reaction of amino groups (—NH2) of MCDEA and the free —NCO groups above. In the research, the tensile properties of TPUs modified by MCDEA MOCA and DMTDA respectively, were examined. The result show that nontoxic MCDEA was satisfactory to modify TPU, the best propertie was realized under the blend of TPU and MCDEA with ratio of 17.

参考文献/References:

[1]王庚超,马敏生,张志平.聚醚型聚氨酯的氢键、微相分离及性能[J].合成橡胶工业, 1991,4(6):409412.
[2]Meier D. A theory of the interface in block copolymers[J].Polym Prepr,1974,15(1):171175.
[3]Krause S. Microphase separation in block copolymersZeroth approximation including surface free energies[J].Macromolecules,1970,3(1):8486.
[4]郁为民.热塑性聚氨酯弹性体及其应用前景[J].中国橡胶,2002,18(22):25.
[5]赵瑞时.热塑性聚氨酯的最新动向[J].世界橡胶工业,2004,31(9):4046.
[6]邓锋杰,李卫凡,徐少华,等.聚氨酯表面接枝丙烯酸甲酯改性研究[J]. 化工新型材料,2008,36(3):6870.
[7]邹德荣.DMTDA交联聚醚聚氨酯胶粘剂研究[J].中国胶黏剂,2004,12(1):3032.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:20101112作者简介:朱岩(1963),女,内蒙古呼和浩特人,教授,博士.研究方向:水性高分子材料,聚合物基纳米复合材料,高分子粘合剂.
更新日期/Last Update: