|本期目录/Table of Contents|

[1]许莉莉,黄普林,万梦秋,等.季戊四醇磷酸酯/玻纤复合改性酚醛泡沫的燃烧行为[J].武汉工程大学学报,2016,38(06):544-548.[doi:10. 3969/j. issn. 1674?2869. 2016. 06. 006]
 XU Lili,HUANG Pulin,WAN Mengqiu,et al.Combustion Behavior of Phenolic Foam Modified by PEPA/Glass Fiber[J].Journal of Wuhan Institute of Technology,2016,38(06):544-548.[doi:10. 3969/j. issn. 1674?2869. 2016. 06. 006]
点击复制

季戊四醇磷酸酯/玻纤复合改性酚醛泡沫的燃烧行为(/HTML)
分享到:

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
38
期数:
2016年06期
页码:
544-548
栏目:
材料科学与工程
出版日期:
2016-12-15

文章信息/Info

Title:
Combustion Behavior of Phenolic Foam Modified by PEPA/Glass Fiber
作者:
许莉莉黄普林万梦秋殷 祥吴 梦邱匡雨
绿色化工过程教育部重点实验室(武汉工程大学),湖北 武汉 430205
Author(s):
XU Lili HUANG Pulin WAN Mengqiu YIN Xiang WU Meng QIU Kuangyu
Key Laboratory of Green Chemical Process (Wuhan Institute of Technology), Ministry?of?Education, Wuhan 430205, China
关键词:
季戊四醇磷酸酯玻纤酚醛泡沫改性 燃烧行为
Keywords:
pentaerythritol phosphate glass fiber phenolic resin composite foams modification combustion behavior
分类号:
TQ328
DOI:
10. 3969/j. issn. 1674?2869. 2016. 06. 006
文献标志码:
A
摘要:
以季戊四醇磷酸酯(pentaerythritol phosphate, PEPA)和玻纤为改性剂,制备了季戊四醇磷酸酯/玻纤改性酚醛泡沫. 利用热重分析、极限氧指数、锥形量热仪对泡沫材料燃烧行为进行了分析. 测试结果表明:加入3%的PEPA,改性酚醛泡沫氧指数值增加了38%;加入3%PEPA和1%的玻纤后,改性酚醛泡沫氧指数值增加了26%;PEPA的加入能明显提高改性酚醛泡沫的初始分解温度和残炭量. 与未改性酚醛泡沫相比,PEPA改性和复合改性酚醛泡沫的最初燃烧的热释放速率分别下降47%和36%,热释放总量降低约50%,能有效降低改性酚醛泡沫引起火灾的可能性和火灾危险中的燃烧程度. 同时,PEPA改性和玻纤复合改性能显著降低酚醛泡沫质量损失速率、有效燃烧热量和烟释放速率,从而有效抑制酚醛泡沫燃烧时烟气的产生,降低其火灾危险性.
Abstract:
Flame-retarded phenolic foams (PF) were prepared by adding pentaerythritol phosphate (PEPA) and glass fiber as modifiers. The combustion behaviors of the phenolic foams were investigated by thermogravimetric analyzer (TGA), limiting oxygen index (LOI), and cone calorimeter. The results of LOI and TGA showed that flame retardancy of the phenolic foams significantly increased. The LOI of modified phenolic foams increased by 38% after adding mass fraction of 3 % PEPA, while that increased by 26% after adding mass fraction of 3% PEPA and 1% glass fiber. The initial decomposition temperature and carbon residue quantity of modified phenolic foams also increased. The heat release rate of modified with PEPA and PEPA-glass fiber composites foams significantly reduced by 47% and 36% , and the total heat release reduced by 50%. The mass loss rate, degree of combustion, effective heat of combustion, smoke release rate and possibility of fire risk of PEPA modified phenolic foams and PEPA-glass fiber composite modified phenolic foams significantly reduced. At the same time, PEPA and glass fiber modification can significantly reduce the mass loss rate of the phenolic foams. Moreover, the decrease of effective combustion heat and the smoke release rate can effectively suppress the generation of flue gas, and reduce the risk of fire.

参考文献/References:

[1] YANG H Y, WANG X, YUAN H X, et al. Fire performance and mechanical properties of phenolic foams modified by phosphorus-containing polyethers[J]. Journal of polymer research, 2012, 19(3):140-149. [2] 徐金潇, 袁树杰. 新型矿用酚醛泡沫材料研究[J]. 安徽理工大学学报(自然科学版), 2015, 35(3): 63-66. XU J X, YUAN S J. Research on a new mine phenolic foam material[J]. Journal of Anhui university of science and technology (natural science), 2015, 35(3): 63-66. [3] MA Y F, WANG J F, XU Y Z, et al. Preparation and characterization of phenolic foams with eco-friendly halogen-free flame retardant[J]. Journal of thermal analysis and calorimetry, 2013, 114(3):1143-1151. [4] GAO M,WU W H,WANG Y H, et al. Phenolic foam modified with dicyandiamide as toughening agent[J]. Journal of thermal analysis and calorimetry, 2016, 124(1):189-195. [5] LIANG B C, LI X Y, HU L H, et al. Foaming resol resin modified with polyhydroxylated cardanol and its application to phenolic foams[J]. Industrial crops and products, 2016, 80: 194-196. [6] 袁莉莉, 顾轶卓, 李敏, 等. 羧基碳纳米管增强酚醛泡沫的压缩性能及热性能[J]. 复合材料学报, 2013, 30(5): 14-20. YUAN L L, GU Y Z, LI M, et al. Compressive property and thermal performances of phenolic foam reinforced with carboxyl carbon nanotubes[J]. Acta materiae compositae sinica, 2013, 30(5):14-20. [7] 张英杰, 李晓峰, 安燕, 等. 聚酰亚胺改性酚醛泡沫[J]. 高分子学报, 2013(8): 1072-1079 ZHANG Y J, LI X F, AN Y, et al. Polyimide modified phenolic foam [J]. Acta polymerica sinica, 2013(8): 1072-1079. [8] ZHOU J T, YAO Z J, CHEN Y X, et al. Thermomechanical analyses of phenolic foam reinforced with glass fiber mat[J]. Materials and design. 2013, 51(5): 131-135. [9] Song S A,Chung Y S,Kim S S. The mechanical and thermal characteristics of phenolic foams reinforced with carbon nanoparticles[J]. Composites science and technology, 2014, 103:85-93. [10] SAZ-OROZCO B D, ALONSO M V, OLIET M. Mechanical,thermal and morphological characterization of cellulose fiber-reinforced phenolic foams[J]. Composites part B engineering, 2015, 75: 367-372. [11] SUI X Y, WANG Z Z. Flame-retardant and mechanical properties of phenolic foams toughened with polyethylene glycol phosphates[J]. Polymers for advanced technologies, 2013, 24(6): 593-599. [12] YANG H Y, WANG X, YU B, et al. A novel polyurethane prepolymer as toughening agent: preparation, characterization, and its influence on mechanical and flame retardant properties of phenolic foam[J]. Journal of applied polymer science, 2013, 128(5): 2720-2728. [13] DING H Y, WANG J F, LIU J, et al. Preparation and properties of a novel flame retardant polyurethane quasi-prepolymer for toughening phenolic foam[J]. Journal of applied polymer science, 2015, 132(35): 42424. [14] LIU L, FU M T, Synthesis and characterization of a flame-retardant toughening agent containing boron for phenolic foams[J]. Journal of building materials, 2016, 19(3): 510-515. [15] 黄普林, 吴梦, 张鹏, 等. 季戊四醇磷酸酯/尿素改性酚醛泡沫的性能研究[J]. 武汉工程大学学报, 2016,38(2): 120-124. HUANG P L, WU M, ZHANG P, et al. Properties of phenolic foam modified by pentaerythritol phosphate/urea[J]. Journal of Wuhan institute of technology, 2016, 38(2):120-124.

相似文献/References:

[1]黄普林,吴 梦,张 鹏,等.季戊四醇磷酸酯/尿素改性酚醛泡沫的性能研究[J].武汉工程大学学报,2016,38(2):120.[doi:10. 3969/j. issn. 1674-2869. 2016. 02. 004]
 HUANG Pulin,WU Meng,ZHANG Peng,et al.Properties of Phenolic Foam Modified by Pentaerythritol Phosphate /Urea[J].Journal of Wuhan Institute of Technology,2016,38(06):120.[doi:10. 3969/j. issn. 1674-2869. 2016. 02. 004]

备注/Memo

备注/Memo:
更新日期/Last Update: 2016-12-23