|本期目录/Table of Contents|

[1]孟文专,王广芹.GMA浇筑式沥青混合料的制备及性能[J].武汉工程大学学报,2019,(04):371-374.[doi:10. 3969/j. issn. 1674?2869. 2019. 04. 013]
 MENG Wenzhuan,WANG Guangqin.Preparation and Properties of Pouring Guss Mastic Asphalt Mixture[J].Journal of Wuhan Institute of Technology,2019,(04):371-374.[doi:10. 3969/j. issn. 1674?2869. 2019. 04. 013]
点击复制

GMA浇筑式沥青混合料的制备及性能(/HTML)
分享到:

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2019年04期
页码:
371-374
栏目:
材料科学与工程
出版日期:
2019-09-27

文章信息/Info

Title:
Preparation and Properties of Pouring Guss Mastic Asphalt Mixture
文章编号:
20190413
作者:
孟文专王广芹
苏交科集团股份有限公司,江苏 南京 211112
Author(s):
MENG WenzhuanWANG Guangqin
JSTI Group Co.,Ltd,Nanjing 211112, China
关键词:
浇筑式沥青混合料沥青胶结料硬度动稳定度冲击韧性
Keywords:
pouring asphalt mixture asphalt binder hardness dynamic stability impact toughness
分类号:
U417.62
DOI:
10. 3969/j. issn. 1674?2869. 2019. 04. 013
文献标志码:
A
摘要:
以特立尼达湖沥青(TLA)和A-70# 基质沥青配制了复合沥青,并将其与集料拌和得到浇筑式沥青混合料(GMA),重点研究了沥青胶结料和拌和时间对GMA混合料性能的影响。结果表明:随着沥青胶结料中TLA质量分数的增加,沥青胶结料的热温度敏感性降低,混合料性的流动性变差、硬度变大,TLA最佳的质量分数为70%;混合料拌和时间的延长,沥青胶结料的老化程度增大,混合料的高温性能、流动性变好,但冲击韧性(抗疲劳性)降低,最佳的拌和时间为1.5~3.5 h。
Abstract:
Asphalt composite was prepared from Trinidad lake asphalt (TLA),A-70# asphalt,and aggregates to obtain pouring asphalt composite. Effects of asphalt binder and mixing time on properties of pouring asphalt composite were investigated. The results show that the increase of mass fraction of TLA has caused negative effects such as temperature insensitivity of the asphalt binder,worse fluidity and hardness of the mixture. It is found that the optimum mass fraction of TLA is 70%. With extending mixing time,the aging degree of the asphalt binder increases,both the high temperature performance and fluidity of the mixture improve,while its impact toughness (i.e.,the resistance fatigue performance) decreases. The optimum mixing time of mixture is between 1.5 and 3.5 h.

参考文献/References:

[1] 朱定,李书亮. 港珠澳大桥钢桥面铺装方案比选及浇注式沥青混合料(GMA)标准化施工工艺控制[J]. 中外公路,2019,39(2):161-164. [2] 纪方利. 细集料分档对MA浇注式沥青混凝土路用性能影响[J]. 公路交通技术,2019,35(1):41-46. [3] 贤良,王志祥. 钢桥面铺装浇注式沥青混合料性能研究[J]. 铁道科学与工程学报,2018,15(8):1956-1962. [4] 乔东华. CT扫描技术用于浇注式沥青混合料空隙特征分析研究[J]. 公路交通技术,2018,34(5):27-31,37. [5] 王朝辉,陈谦,高志伟,等. 浇注式沥青混凝土现状与发展[J]. 材料导报,2017,31(9):135-145. [6] 杨东来,徐永钢,张育才. 港珠澳大桥GMA浇注式沥青混凝土施工技术[J]. 筑路机械与施工机械化,2016,33(1):31-40. [7] 黄坚明. 拌和参数对港珠澳大桥浇注式沥青混凝土性能的影响研究[D]. 重庆:重庆交通大学,2016. [8] 汪水银,徐伟,张肖宁,等. MA浇注式沥青混凝土性能敏感性试验研究[J]. 公路,2014,59(8):199-202. [9] 张顺先. MA浇注式沥青混凝土高温稳定性能影响因素研究[J]. 公路交通技术,2016,32(4):10-14. [10] 华南理工大学联合体. 港珠澳大桥钢桥面铺装专题研究报告[R]. [S.l]:[s.n],2013. [11] British Standards Institution. Specification for mastic asphalt for roads,footways and pavings in building: BS1447:1988[S/OL]. [2019-04-05]. http://www.doc88.com/p-6931509257152.html. [12] British Standards Institution. Methods of sampling and testing mastic asphalt used in building and civil engineering: BS5284:1993[S/OL]. [2019-04-05]. http://www.doc88.com/p-2478779495819.html. [13] 聂文,张肖宁,吴志勇. 不同工艺对浇筑式沥青混合料疲劳性能的影响[J]. 交通科学与工程,2013,29(4):8-12. [14] 张肖宁,邹桂莲. 沥青混合料抵抗反射裂缝能力的评价方法研究[J]. 华南理工大学学报(自然科学版),2001,29(7):88-91. [15] 邹桂莲,张肖宁,王绍怀. 应用冲击韧性评价沥青混合料抵抗反射裂缝能力的研究[J]. 公路,2004(10):119-122. [16] 杜闯闯. 湖沥青改性沥青混合料路用性能的研究[D]. 重庆:重庆交通大学,2017. [17] 孟文专,杨亮,夏智,等. 冷补沥青混合料的制备及其性能[J]. 武汉工程大学学报,2011,33(10):49-53. [18] 王琎晨. 浇筑式沥青混凝土施工流动性与高温稳定性影响因素分析[J]. 石油沥青,2016,30(6):11-15.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:2019-06-01作者简介:孟文专,硕士,工程师。E-mail:327447913@qq.com引文格式:孟文专,王广芹. 浇筑式沥青混合料(GMA)的制备及性能[J]. 武汉工程大学学报,2019,41(4):371-374.
更新日期/Last Update: 2019-08-05