|本期目录/Table of Contents|

[1]张涛,吴艳阳,杨清,等.立式撞击流反应器中桨叶优化设计[J].武汉工程大学学报,2011,(05):78-81,88.[doi:10.3969/j.issn.16742869.2011.05.021]
　ZHANG Tao,WU Yang,YANG Qing,et al.Optimized design for blades inclinations in Vertical Circulation Impinging Stream Reactor[J].Journal of Wuhan Institute of Technology,2011,(05):78-81,88.[doi:10.3969/j.issn.16742869.2011.05.021]
点击复制

立式撞击流反应器中桨叶优化设计(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2011年05期
页码:
78-81,88
栏目:
机电与信息工程
出版日期:
2011-05-31

文章信息/Info

Title:
Optimized design for blades inclinations in Vertical Circulation
Impinging Stream Reactor
文章编号:
16742869(2011)05007804
作者:
张涛; 吴艳阳; 杨清; 李良
武汉工程大学机电工程学院,湖北 武汉 430074
Author(s):
ZHANG Tao;  WU Yang;  YANG Qing;  LI Liang;  LI Liang
School of Mechanical and Electrical Engineering, Wuhan Intitute of Technology, Wuhan 430074, China
关键词:
立式撞击流反应器; 倾斜角; 混合性能
Keywords:
Vertical Ompinging Stream Reactor;  inclination;  mixed performance
分类号:
TQ05
DOI:
10.3969/j.issn.16742869.2011.05.021
文献标志码:
A
摘要:
为探讨倾斜角对立式循环撞击流反应器（VCISR）混合性能和桨叶受力的影响规律,采用数值方法分别模拟了四种倾斜角下对反应器内流速和桨叶受力情况,并展开了对比分析,将桨叶倾斜角θ分别设置为15°、30°、45°、60°.结果表明,当θ=45°时,反应器内的混合性能最佳;工质的循环能力最强;上下桨叶受到的合力最小;桨叶绕Z轴旋转的合力矩最小,该结果为立式撞击流反应器的桨叶的倾斜角优化设计提供理论参考依据.
Abstract:
In order to explore the influence rules of the mixed performance and the forced blades under different inclinations, the numerical simulation method was employed to simulate the force analysis of blades and speed in the reactor under four various inclinations in this paper. The inclinations of the blades θ were set as 15°、30°、45°、60°, respectively. The results were obtain through the comparative analysis for four different conditions. The results showed that, when θ=45°, the mixed performance of the reactor and the cycle capability of the intermittent were optimum as well as the resultant force of the fluctuation blades and the resultant moment of force of the blades rotating along Z axis were the minimum. This conclusions provided the theoretical references for the optimization design of the blades in the VCISR.

参考文献/References:

［1］伍沅.撞击流：原理·性质·应用［M］.北京:化学工业出版社,2006.
［2］WU Yuan.Properties and Application of Impinging Streams［J］.Journal of Wuhan institute of technology,2002,24(1):916.
［3］周玉新,程敬华.浸没循环撞击流反应器制备纳米氧化铝的工艺研究［J］.武汉工程大学学报,2010,32(5):14.
［4］李芳,伍沅.撞击流吸收器燃煤烟气湿法脱硫(1)装置设计［J］.武汉工程大学学报,2005,27(1):4345.
［5］伍沅,徐建民.立式循环撞击流反应器［P］.中国专利,ZL03235518.1.2003.
［6］张建伟,徐成海.浸没循环撞击流反应器的流场数值模拟［J］.东北大学学报:自然科学版,2004,25(2):156159.
［7］陈志平,章序文,林兴华.搅拌预混合设备设计选用手册［M］.北京：化学工业出版社,2004.
［8］高九阳,俞九阳,王成刚.沟槽对O形密封结构性能的影响［J］.武汉工程大学学报,2010,32(7):7880.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期：20101105基金项目：国家自然科学基金50906065作者简介：张涛（1987），男，湖北天门人，硕士研究生.研究方向：化工过程机械.指导老师：吴艳阳，男，教授，博士，硕士研究生指导老师.研究方向：压力容器及管道无损检测、汽车冲压件焊接变形控制、以及汽车焊装生产线焊接夹具优化设计，结构力学等.
更新日期/Last Update: